ARCHIVE CORPORATION

40MB INTERFACE CARD

Card Type                   Tape Drive/Floppy Drive adapter card
Tape/Floppy drives          Unidentified
supported
Data Bus                    8-bit ISA
Card Size                   Three-quarter length, half-height card

[Image]

                                CONNECTIONS

        Function           Location          Function           Location

  Fuse (1.0 Amp; +5 Volt      F1      External Tape                J5
  DC)                                 interface connector

  Fuse (2.0 Amp; +12          F2      Internal Tape                J6
  Volt DC)                            interface connector

  DC Power connector          J2      XT Floppy interface          J7
                                      connector

  AT Floppy interface         J3      Resistor network            RN1
  connector

  Controller interface        J4
  connector

                        BASE I/O ADDRESS SELECTION

               Setting                                JP1

  »                3F2h                        Pins 2 & 3 closed

                   370h                        Pins 1 & 2 closed

                       MISCELLANEOUS TECHNICAL NOTES

  Adapter intended to be used with Archive Corporation tape drives
  (internal model 5540 and external model 3540C).